Hot Water System Failed Suddenly? Here's What to Do Next
Hot Water System Failed Suddenly? Here's What to Do Next
Blog Article
We have unearthed this great article about How to Troubleshoot and Repair an Electric Water Heater directly below on the internet and figured it made good sense to share it with you here.
Lots of modern-day houses use an electric hot water heater for their heater, as a result of its ease and also simplicity of use. Nonetheless, similar to any other electric devices, issues may occur with its use, unexpectedly. It can be truly irritating to awaken to a cold shower instead of a hot one or having your bathroom with water that isn't warm adequate or perhaps as well hot. Whatever the case might be, hot water heater issues can be rather nerve-racking. Luckily, we've made a list of possible remedies to your water heater concerns. There are a variety of elements that can trigger a lot of these problems, maybe a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for safety. Whatever the problem is, getting it repaired should not posture excessive of a problem if you follow these actions:
Check Your Power Supply:
As fundamental as this may appear, it is very needed. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the concern, simply transform it off and on once again. Change any type of busted or worn-out fuse. Check the appliance with power after these adjustments to see if it's now functioning.
Check the Heating Element in the Hot Water Heater:
If it's not a power problem, after that attempt checking out your heating element if it is still functioning. Test each of your heating elements to ensure the problem isn't with any of them. If any one of them is faulty, replace that part and then examine whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you might need to inspect the temperature level settings on your upper thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the access panel and press the red switch for temperature level reset above the thermostat. This ought to aid warm the water. Transform the circuit breaker back on and check if the issue has been fixed.
Call A Specialist:
If after changing all defective parts as well as resetting your temperature level, the hot water heater still isn't working, you may require to speak to a specialist plumber for a professional opinion. The problem with your heating unit could be that the cold and hot faucets have actually been switched over or it may be undersized for the amount of hot water required in your house. Whatever the instance might be, a specialist plumber would certainly aid address the problem.
Conclusion
Water heater problems are not always significant. Many of them are due to minor issues like a blown fuse or damaged heating element. Changing the damaged components need to work. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our topic on How to Troubleshoot and Repair an Electric Water Heater. Thanks a lot for spending some time to read our post. If you appreciated our article plz remember to pass it around. Thank you for your time invested reading it.
No more leaks! Report this page